| <back> |
Dry Cutting Blades - Laser welded
| | |
Segments |
Nominal Diameter |
| |
Part.-No. |
Quantity |
Dimensions in mm |
| D640: for general construction materials, concrete, titles and lime sandstone | | 957741 | 8 | 35x2,2x7,0 | 115 | | 957742 | 9 | 35x2,2x7,0 | 125 | | 957743 | 11 | 35x2,2x7,0 | 150 | | 957744 | 12 | 35x2,2x7,0 | 180 | | 957746 | 15 | 40x2,6x7,0 | 230 |
| Standard centre bore Ø 22,2, other bore configurations on request. |
| 
| D651: universal for concrete, reinforced concrete and granite | | 957721 | 18 | 40x2,8x9,0 | 300 | | 957722 | 21 | 40x2,8x9,0 | 350 | | 957723 | 24 | 40x3,2x9,0 | 400 | | 957724 | 24 | 40x3,2x9,0 | 425 | | 957727 | 26 | 40x3,2x9,0 | 450 | | 957725 | 30 | 40x3,6x9,0 | 500 | | 957726 | 36 | 40x3,6x9,0 | 600 | | 957717 | 40 | 40x3,6x9,0 | 700 | | D660: Standard blade-universal blade for general construction materials, concrete, roof tiles and lime sandstone | | 957671 | 18 | 40x2,8x9,0 | 300 | | 957672 | 21 | 40x2,8x9,0 | 350 | | 957673 | 24 | 40x3,2x9,0 | 400 | | 957674 | 26 | 40x3,2x9,0 | 450 | | 957677 | 30 | 40x3,6x9,0 | 500 |  | D664: Turbo allround for concrete, masonry bricks and medium hard granite | | 957921 | 16 | 50x3,0x10,0 | 300 | | 957922 | 19 | 50x3,0x10,0 | 350 | | 957923 | 22 | 50x3,2x10,0 | 400 | | 957924 | 25 | 50x3,6x10,0 | 450 | | 
| D684: for abrasive materials, asphalt, lime sandstone, poroton, green concrete and finish | | 957821 | 18 | 40x2,8x10,0 | 300 | | 957822 | 21 | 40x3,2x10,0 | 350 | | 957823 | 24 | 40x3,2x10,0 | 400 | | 957824 | 26 | 40x3,6x10,0 | 450 | | 957825 | 30 | 40x4,2x10,0 | 500 | | 957826 | 36 | 40x4,2x10,0 | 600 |
| Standard centre bore of Ø25,4mm other bore configurations available on request |
Dry Cutting Blades - Continous Rim
| |
Part.-No. |
Segments
Dimensions in mm |
Nominal Diameter |
| D460: turbo blades (corrigated) for concrete, tiles,masonry bricks, soft to medium hard granite | | 957861 | 2,4x8,0 | 115 | | 957862 | 2,4x8,0 | 125 | | 957866 | 2,8x8,5 | 230 | | 957868 | 3,2x8,5 | 300 | | 957869 | 3,2x8,5 | 350 | D410: for tiles and ceramics - dry cut | | 957830 | 1,6x5,0 | 110 | | 957831 | 1,6x5,0 | 115 | | 957832 | 1,6x5,0 | 125 | | 957833 | 1,6x5,0 | 150 | | 957834 | 1,6x5,0 | 180 | | 957835 | 1,6x5,0 | 200 | | 957836 | 1,6x5,0 | 230 | | 957837 | 1,6x5,0 | 250 | | 957838 | 2,4x5,0 | 300 | | 957839 | 2,4x5,0 | 300 | | 957840 | 2,4x5,0 | 350 |
Standard centre bore of Ø 22,2 mm. Over Ø 300 mm, centre bore Ø 25,4mm.
Other bore configurations on request. |
| |
