Wall Saw Blades

HomeYour Longdia Our Products  Service Team CelleLongdia vor location ContactImpressum
<back>

Wall Saw Blades W 91 - W 92

  Part.-No. Segments  
 W 91W 92 Quantity Dimensions Blade Nominal Diameter

9524569524765620x3,6x7,0600
9524579524775620x5,0x7,0600
9524669524866020x3,6x7,0650
9524679524876020x5,0x7,0650
9524589524786420x3,6x7,0700
9524599524796420x4,7x7,0700
9524609524807420x4,7x7,0800
9524619524818420x4,4x7,0900
9524629524829020x4,4x7,01000
95246395248311420x4,4x7,01200
95246495248414020x4,4x7,01500
W 91: Smoother cutting type for reinforced concrete and with normal aggregates
W 92: Improved life times type for reinforced concrete with abrasive aggregates.

Retipping is only possible if the blade is not demaged. All saw blades have bores for flush sawing.
Wall saw blades have a centre bore of Ø 35mm , a reduction ring Ø25,4mm is included.
Other diameters and different hole pattern are available on request..

Normal gullet
  • We recommend this type for high speed power above 15 KW.
  • For use with wall saws. Also for use with floor saws.
  • Recommended for concrete with high abrasivity.
  • Recommended for machines with high speed power in hard reinforced concrete

    • Wide gullet
  • We recommend this type for machines of medium speed power to 15 KW.
  • For use with wall saws. Also for use with floor saws max. 11 KW with manual feed.
  • Recommended for concrete of medium abrasivity.
  • We recommend to use the type, short gullet, for hard reinforced concrete.

    • Short gullet

    - We also recommend the wide gullet type due to a better cutting condition for reinforced steel.

     

    Wall saw blades W 110 - W 120 - W 130

      Part.-No. Segments Blades Nominal Diameter
     W 110W 130W 120 Quantity Dimensions in mm

    normal gullet
    950122950142-3640x3,6x10600
    950123950143-3640x5,0x10600
    950242950152-3840x3,6x10650
    950243950153-3840x5,0x10650
    950245950155-4040x3,3x10700
    950124950144-4640x5,0x10750
    950240950221-4640x4,7x10800
    950125950145-5040x4,4x10900
    950126950146-5640x4,4x101000
    950127950147-6840x4,4x101200
    950128950148-8440x4,4x101500
     

     

    Wide gullet
    950322950342-2840x3,6x10600
    950323950343-2840x5,0x10600
    950332950352-3040x3,6x10650
    950333950353-3040x5,0x10650
    950335950357-3240x3,3x10700
    950324950344-3640x5,0x10750
    950510950506-3740x4,7x10800
    905325950346-4240x4,4x10900
    950326950346-4540x4,4x101000
    950327950347-5740x4,4x101200
    950328950348-7040x4,4x101500
     

     

    Short gullet
    9506229506429506625620x3,6x10600
    -950656-5620x4,2x10600
    9506239506439506635620x5,0x10600
    9506329506529506726020x3,6x10650
    -950660-6020x4,2x10650
    9506339506539506736020x5,0x10650
    9506359506559506756420x3,6x10700
    -950657-6420x4,2x10700
    9506249506449506647220x5,0x10750
    9506109506069506787420x4,7x10800
    9506259506459506658420x4,4x10900
    9506269506469506669020x4,4x101000
    95062795064795066711420x4,4x101200
    95062895064895066814020x4,4x101500

    Retipping is possible if the blade is in good order and condition.
    All wall saw blades have bores for flush sawing.
    Saw blades have a centre bore of 35 mm,  a reduction ring of 25,4 mm is included.
    Other diameters and different hole pattern are available upon request.

     

    W 110 (soft bond type)

    For reinforced concrete with less abrasive aggregates with lime stone or Alpine conglomerate. We especially recommend W 110 short gullet for wall saws with electrical speed power.

    W 120 (medium hard bond type)

    For reinforced concrete with medium aggregates.

    W 130 (wear-resistant bond type)

    For reinforced concrete with quartz, basalt and flint aggregates (magma rock).

    		 
    <back>